消息
4axis machining center MG3300/4 四轴加工中心
BASIC DOCUMENT基本说明
5.5 Kw spindle 5.5 Kw主轴电机
2000-24000rpm 2000-24000转/分钟
8mm Aluminium/3mm Steel 8mm铝/3mm铁
×4pneumatic clamping 4套气动压紧装置
4Tools magazine(option 8) 4套自动换刀刀具库（可选8套）
HICAM CAD /CAM 3D design HICAM CAD/CAM 3D设计
Only at 0°inside the rings 只在0°时在环内
Through the rings 穿过环
Inside the ring 在环内
3300-maximum stroke 最大行程3300
DESCRIPTION 设备说明
Machining center with moving column and vertical spindle with 4 axis controlled by CNC including rotationof the allows any angle ranging from-90°to +90°in automatic working cycle.
加工中心采用移动立柱和垂直主轴，4轴由CNC控制，包括旋转角度，允许在自动工作循环中从0°至180°范围内的任何角度。
Quick change hand tool cone ISO30 pneumatically controlled;
气动控制的ISO30快速换刀锥柄。
Automatic tool change with station for 4 tools (optionally 8 tools)
带4套刀具库的自动换刀（选装8套刀具库）
pneumatic standard vices with manual positioning ( Automatic positioning and more vices as option)
4个手动定位的气动标准夹具（可选装自动定位和更多的夹具）
Possibility to work steel up to 4 mm and stainless steel up to 3 mm with a specific accessory.
使用特定附件可以将钢材加工到4毫米，不锈钢加工到3毫米。
FEATURES 特征
Axis movement and clamps rails with recirculating ballscrew and servodrive
轴运动并用滚珠丝杠和伺服驱动器锁紧导轨
Motion rotated clamp base by rail and wheels
工作台通过导轨和轮子运动旋转
Numerically controlled axes with 4 brushless motors
数控轴包含4个无刷伺服电机
Transmission axis with tilted teeth rack and pinion
传动轴采用斜齿条和小齿轮
Start cycle with two-handed safety device
双手安全装置启动循环
horizontal pneumatic clamps with low pressure device
4个带低压装置的水平气动夹具
Mist lubrification (emulsified oil)
微量润滑（切削液）
Tool magazine cones ISO30
ISO30刀具锥柄
Vice jaws PVC adjustable using keys
使用按键可调节压钳口
Spindle motor driven by inverter
主轴电机由变频器驱动
Swiveling console
可旋转控制台
USB 2.0 port on the control panel and ethernet RJ45 socket
控制面板有USB2.0接口和以太网RJ45插座
Preinstalled barcode reader connection
有条码阅读器连接
NC - Industrial PC with Intel microprocessor
NC-带有Intel处理器的工业电脑
LCD display TFT (800 x 600) color 10.4 " - touch screen
LCD显示TFT(800×600） 10.4”触摸屏
Operating system Windows XP Embedded RT
WINDOWS XP操作系统
Software- 3D dimensional
3D尺寸软件
Indication vice positioning software with reference line of metric
用公制参考线显示副定位软件
TECHNICAL DATA 技术参数
Power supply (treephase + neutral) 电源 380/400-50/60 Volt / Hz
Spindle drive phase 主轴功率 5.5 KW
Spindle speed adjustable 主轴转速 2000-24000 rpm
Axis stroke X-Y-Z轴行程X-Y-Z 3300 -250-200 mm
Speed positioning axis 轴定位速度 X- Y-Z 65-25-25 m/min
Tilt axis adjustable clamp base 工作台可调角度 -90° 0° +90°
Time rotation axis from 0 ... 90 ° 0-90°旋转时间 2 sec
Tolerance positioning axes定位轴公差 +/- 0.1 mm
Capacity vice (bxh) 压钳尺寸 160x120 mm
Diameter cutter 刀具直径 10 mm
Maximum diameter blade最大铣刀直径 140 mm
Weight重量 1850 Kg
OPTIONS 选装
S1 spindle power 6 kW 2000-24000 rpm / min.
S1主轴6.6KW 2000-24000转/分钟
Automatic positioning for 4 vices
4套自动定位装置
Pneumatic locking morse 4
4套气动锁紧
- manual clamping vice
1套手动压紧装置
- pneumatic clamping vice
1套气动压紧装置
- clamping vice with automatic positioning
1套自动定位压紧装置
Tooling Station for 4 tools (right side)
4个刀具位的工具站（右边）
Barcode reader with wire and software
带有导线和软件的条码阅读器
Tunnel torque L = 500 Top
隧道扭矩L=500
Cover complete with windows and two mouths D.100 fume Extraction License
完全密封的窗户和两个直径100的排料口
CAD / CAM software HICAM 3 dimensional USB Key additional USB Key for office PC
(not used simultaneously)
CAD/CAM软件和HICAM 3维有USB秘钥另外还有办公室电脑的UCB秘钥（不能同时使用）
Additional license CAD / CAM three-dimensional HICAM 3 with USB
附加许可证CAD / CAM和带USB的三维HICAM 3
